|
Traditional single-beam monitors are susceptible to erroneous readings because of the subject’s tail or body size. If the animal turns around near a gate the tail may interrupt the IR beam and record only a single beam break, which is erroneously scored as a full entry into the arm. Additionally some mazes that are used with large variety of subject species and sizes may find that some are able to (unknowingly) pass by the IR beam without detection by either running under or jumping over it. The Photobeam Curtain solves these problems by only scoring entries when several beams are broken, ignoring single beam breaks as tail interference. Additionally the curtain spans a broader height range (5.5 mm from the floor up to 58.5 mm above) which is near impossible to pass by without detection. The Photobeam Curtain is ideal for mazes where traditional IR beams have resulted in these problems. It’s also a perfect solution for when video tracking is not ideal due to less-than-ideal lighting or maze lids that obstruct the view from an overhead camera. It also serves as an economical alternative to expensive video tracking systems when the maze has only a few arms, like Elevated Plus Maze, Radial Arm Maze, “T” Maze or Figure “8” Maze. Features / SpecificationsComes complete with PC interface & “Universal Maze Monitoring” softwareSupport for up to 128 curtains per PC IR beams spaced 8 mm apart Curtain height is 2.1 inches (53 mm) 120/220VAC 60/50Hz Operation
Ordering Information0405 Multi-Varimex Universal Open Field and Maze Monitoring Software0421 Multi-Varimex IR Beam "Curtain" 0430-08 Multi-Varimex 8 IR Beam Interface Cabinet 0430-16 Multi-Varimex 16 IR Beam Interface Cabinet Multi-Varimex Configurations 0441-06 Multi-Varimex Configured for 6 IR Curtains with Software 0441-08 Multi-Varimex Configured for 8 IR Curtains with Software 0441-16 Multi-Varimex Configured for 16 IR Curtains with Software 0441-32 Multi-Varimex Configured for 32 IR Curtains with Software |